冶金与材料工程学院近三年发表主要科技论文 |
序 号 |
论文名称 |
发表(出版)单位及时间 |
完成人 |
1 |
Electrochemical behavior of mesh and plate oxide coated anodes during zinc electrowinning |
Trans. Nonferrous Met. Soc. China 2016, 26, 589−598 |
张伟 |
2 |
The investigation of the electrochemically supercapacitive performances of mesoporous CuCo2S4 |
RSC Adv 2016, 6: 84236-84241 |
朱裔荣 |
3 |
Porous carbons derived from microalgae with enhanced electrochemical performance for lithium-ion batteries |
Electrochimica Acta 2016, 194, 10-16 |
陈晗 |
4 |
LiFePO4/carbon nanowires with 3D nano-network structure as potential high performance cathode for lithium ion batteries |
Electrochimica Acta 2016, 191, 23-28 |
陈晗 |
5 |
Urchin-shaped Nb2O5 microspheres synthesized by the facile hydrothermal method and their lithium storage performance |
Materials Letters 2016, 167, 106-108 |
陈晗 |
6 |
Preparation and Lithium Storage Performance of Siliconand Carbon Microrods by Chemical Vapor Co-Deposition |
Russian Journal of Electrochemistry 2016, 52, 181–184 |
陈晗 |
7 |
Hierarchical porous LiFePO4/Carbon composite electrodes for lithium-ion batteries |
Materials Technology 2016,1-7 |
陈晗 |
8 |
Effect of different compatibilizers on the mechanical and thermal properties of starch/polypropylene blends |
J. APPL. POLYM. SCI.2016, DOI: 10.1002/APP.43332 |
陈宪宏 |
9 |
Isopiestic Measurement of Water Activity of the Li2SO4-MgSO4-H2O System at 323.15 and 373.15 K |
Journal of Chemical and Engineering Data2016, 61, 3157-3162 |
阳海棠 |
10 |
Isopiestic Measurement of Water Activity for the H2SO4-H3PO4-H2O System at 298.15 K |
Journal of Solution Chemistry2016, 45, 1580-1587 |
阳海棠 |
11 |
多道次MIG焊铝合金的焊接界面行为研究 |
稀有金属材料与工程2016, 45(2):415-420 |
蹇海根 |
12 |
Preparation and thermal stability of ultrafine nickel powders containing hcp-Ni nano-crystalline using liquid phase reduction method |
Metallurgical and Materials Transactions B:Process Metallurgy and Materials2016, 47(5):2793-2798- |
夏志美 |
13 |
Effect of Microstructure and Segregation of Elements on the Impact Toughness of High-Strength Low-Carbon Bainitic Steel |
METAL SCIENCE AND HEAT TREATMENT卷: 58 期: 3-4 页: 138-141 2016 |
杜民献 |
14 |
Experimental Investigation of the Ti-Nb-Sn Isothermal Section at 1173 K |
Metals - Open Access Metallurgy Journal 2016, 6(3).1-9 |
王建丽 |
15 |
Isopiestic Measurement on Aqueous Solutions of Heavy Metal Sulfates: MSO4 + H2O (M = Mn, Co, Ni, Cu, Zn). 2. T=373.15 K |
Journal of Chemical and Engineering Data2016, 61, 3406-3412 |
阳海棠 |
16 |
Effects of anhydrites before and after modification as well as their contents on the thermal and mechanical properties of polyamide 6/anhydrite composites |
Polymer composite2016, 2360-2368 |
陈宪宏 |
17 |
Industrial waste silica preparation of silicon carbide composites and their applications in lithium-ion battery anode |
Journal of Alloys and Compounds2017(695):100-105 |
向楷雄 |
18 |
Solubilities of grain-growth inhibitors in WC-Co-based cemented carbides: Thermodynamic calculations compared to experimental data |
International Journal of Refractory Metals and Hard Materials2016, 61: 121-127 |
彭英彪 |
19 |
A thermodynamic evaluation of the C-Cr-Nb system |
CALPHAD2016, 53: 10-19 |
彭英彪 |
20 |
Hierarchical porous LiFePO4/Carbon composite electrodes for lithium-ion batteries |
Materials Technology2017, 32(4): 203-209 |
陈晗 |
21 |
Frogegg-like Li3V2(PO4)3/carbon composite with three dimensional porous structure and its improved electrochemical performance inlithium ion batteries |
Materials Letters2017, 204: 104-107 |
陈晗 |
22 |
Nb2O5 nanospheres/surface-modified graphene composites as superior anode materials in lithium ion batteries |
Ceramics International2017, 43(8): 6232-6238 |
陈晗 |
23 |
Preparation and electrochemical properties of nanocable-like Nb2O5/ surface-modified carbon nanotubes composites for anode materials in lithium ion batteries |
Electrochimica Acta2017, 246: 1088-1096 |
陈晗 |
24 |
Box-implanted Nb2O5 nanorods as superior anode materials in lithium ion batteries |
Ceramics International 2017, 43(15): 12388-12395 |
陈晗 |
25 |
从工业废渣中浸出钴镍试验研究 |
湿法冶金2017,36(4):267-270 |
肖利 |
26 |
酸析法结晶钴铜矿浸出反萃液中的硫酸铜 |
有色金属(冶炼部分)2017,4:6-9 |
肖利 |
27 |
Silicon carbide nano-fibers in-situ grown on carbon fibers for enhanced microwave absorption properties |
Ceramics International2017, 43(7):5628-5634 |
周伟 |
28 |
Carbon fiber/Si3N4 composites with SiC nanofiber interphase for enhanced microwave absorption properties |
Ceramics International2017, 43(15): 12328-12332 |
周伟 |
29 |
夹层结构Cf-Si3N4复合材料微波介电响应机理研究 |
无机材料学报2017, 32(1):86-90 |
周伟 |
30 |
炭/炭复合材料表面SiC/ZrSiO4-SiO2复合涂层 的抗氧化性能与红外发射特性研究 |
稀有金属材料与工程2017, 46(11):3479-3483 |
周伟 |
31 |
高强度船板钢钙处理热力学计算分析-夹杂物变质研究和应用 |
特殊钢2017, 38(3):23-27 |
贺道中 |
32 |
高纯无水InCl3 制备工艺的研究 |
中国有色冶金2017,46(5):62-65 |
刘建华 |
33 |
表面封闭法对铝阴极耐腐蚀性的影响 |
表面技术2017,4 6(3):229-235 |
刘建华 |
34 |
Controllable preparation of highly uniform CuCo2S4 materials as battery electrode for energy storage with enhanced electrochemical performances |
Electrochimica Acta2017, 249:64-71 |
朱裔荣 |
35 |
TiO2/Al2O3薄膜对金刚石表面改性研究 |
湖南工业大学学报(自然科学版)2017,31(1):87-92 |
胡伟达 |
36 |
Stepwise Synthesis of Graphene Oxide-Wrapped Magnetic Composite and Its Application for the Removal of Pb(II) |
Arabian journal for science and engieering2017, 42(10):4239-4247 |
胡忠良 |
37 |
Recyclable graphene oxide-covalently encapsulated magnetic composite for highly efficient Pb(II) removal |
Journal of environmental chemical engineering2017, 5: 4630-4638 |
胡忠良 |
38 |
Oxygen-containing hierarchically porous carbon materials derived from wild jujube pit for high-performance supercapacitor |
Electrochimica Acta2017, 231: 417-418 |
胡忠良 |
39 |
Embedding of Mg-doped V2O5 nanoparticles in a carbon matrix to improve their electrochemical properties for high-energy rechargeable lithium batteries |
Journal of materials chemistry A 2017, 5: 17432-17441 |
胡忠良 |
40 |
Preparation and Properties of Agricultural Residuals-Iron Concentrate Pellets |
Advances in Materials Science and Engineering Volume 2017 , Doi:10.1155/2017/9407259, 7 pages |
刘竹林 |
41 |
Solution behavior of ZnS and ZnO in eutectic Na2CO3-NaCl molten salt used for Sb smelting |
Journal of Central South University 2017, 6(24):1269-1274 |
叶龙刚 |
42 |
TiB2基硬质材料的研究进展 |
硬质合金期刊2017,3(34) : 202-211. |
周书助 |
43 |
注凝成型技术的研究与进展 |
硬质合金期刊2016, 6(33):428-436 |
周书助 |
44 |
Micro-morphology of fatigue crack initiation and propagation behavior in high strength aluminum alloy |
Materials Science and Engineering A 684(2017):213-221 |
蹇海根 |
45 |
Influence of microstructure on fatigue crack propagation behaviors of an aluminum alloy: Role of sheet thickness |
Micro and nano letters 180(2017):105-114 |
蹇海根 |
46 |
退火态5083铝合金焊接接头组织与性能分析 |
湖南工业大学学报2017,31(4):59-64 |
蹇海根 |
47 |
Hot deformation behavior of Al-9.0Mg-0.5Mn-0.1Ti alloy based on processing maps |
Transactions of Nonferrous Metals Society of China 2017, 27(2):289-297 |
范才河 |
48 |
Microstructure evolution and strengthening mechanisms of spray-formed 5A12 Al alloy processed by high reduction rolling |
Transactions of Nonferrous Metals Society of China 2017, 27:2363-2370 |
范才河 |
49 |
Flow stress behavior of spray-formed Al-9Mg-0.5Mn-0.1Ti alloy during hot compression process |
Advanced in Energy Science and Equipment Engineering 2017,(2):973-976 |
范才河 |
50 |
大应变热轧喷射成形高镁铝合金的微观结构及力学性能 |
中国有色金属学报2017, 27(1):64-71 |
范才河 |